Explora Colar, Criativo e outros!

Explorar tópicos relacionados

colar cantos 90º

colar cantos 90º

Mala necklace made ​​of 6 and 8 mm - 0.236 and 0.315 inch, beautiful jasper gemstones. Together they count as 108 beads. The mala is decorated with jasper, jade and hematite.  The total length of the mala necklace is approximately 87 cm - 34.25 inch.

Beautiful jasper gemstone mala necklace

Mala necklace made ​​of 6 and 8 mm - 0.236 and 0.315 inch, beautiful jasper gemstones. Together they count as 108 beads. The mala is decorated with jasper, jade and hematite. The total length of the mala necklace is approximately 87 cm - 34.25 inch.

Corner Jig - by Rotceh @ LumberJocks.com ~ woodworking community

Corner Jig - by Rotceh @ LumberJocks.com ~ woodworking community

для плотницкого дела

для плотницкого дела

Plank forming Jig - one row of adjustable nylon formers are arranged to the shape of the bend you need. Planks are then soaked in hot water for several minutes to make them pliable. Then they're placed against the first row of formers. The second row of formers is then slid up against the planks to hold them tightly in place. Remove the planks when they're dry.

Plank forming Jig - one row of adjustable nylon formers are arranged to the shape of the bend you need. Planks are then soaked in hot water for several minutes to make them pliable. Then they're placed against the first row of formers. The second row of formers is then slid up against the planks to hold them tightly in place. Remove the planks when they're dry.

44 Shopmade Miter Clamps

Make Your Own Miter Clamps #5 Fabriquez vos propres serre-joints d’angle

44 Shopmade Miter Clamps

Scraper Blade Holders as a lot of different homage tool info

Scraper Blade Holders as a lot of different homage tool info

Resultado de imagem para FERRAMENTAS CASEIRAS PARA MARCENARIA

Resultado de imagem para FERRAMENTAS CASEIRAS PARA MARCENARIA

How to fix and improve cheap bar clamps

How to fix and improve cheap bar clamps

Miter joints are some of the weakest in woodworking because of poor end-grain to end-grain gluing. That’s why I always reinforce my miter joints with a spline. I used to cut the spline slots with a jig on my tablesaw, but that gets awkward with a large frame. Recently, I began using my biscuit joiner to simplify this process. By adding an aluminum plate to the jointer’s fence, as shown, the slot is automatically centered on the joint. I cut the added plate to shape using a metal-cutting…

Miter joints are some of the weakest in woodworking because of poor end-grain to end-grain gluing. That’s why I always reinforce my miter joints with a spline. I used to cut the spline slots with a jig on my tablesaw, but that gets awkward with a large frame. Recently, I began using my biscuit joiner to simplify this process. By adding an aluminum plate to the jointer’s fence, as shown, the slot is automatically centered on the joint. I cut the added plate to shape using a metal-cutting…

Pinterest
Pesquisar